Clear PARTALL Film #10 Polyvinyl Alcohol (PVA) Quart

00
:
00
:
00

$ 14

4.5 (685)

In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Order today and save $3.64 ! The discount is automatically applied on the checkout page!
Hot sale!

86 people are currently viewing this product.

Only 50 items left, while supplies last!

Once dry, the PVA film is resistant to solvents in the resin system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester, vinylester, or epoxy resins and various surfaces but may be used with most thermoset resins. PARTALL Film #10 is not recommended for use with substrates or resins (e.g. phenolics) containing water or giving off water during cure or with automotive finishes. PARTALL Film #10 parts easily from surface and is readily dissolved from parts and spray equipment with water. Protects against surface hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out Same PVA as the green but this is clear
Share